Mini Vci Driver For Toyota Windows 10

Posted on by

Download (PDF, 203KB) Unable to connect to vim – This has to do with a misplaced path; essentially Techstream is searching for MVCI32.dll in C: but really it resides in C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS MVCI32.dll.

  1. Ive tried 15 different tutorials on windows 10 and XP and have yet to complete the installation. I followed the instructions to a when I extract the contents of the folder 'MVCI Driver for Toyota TIS.zip' it detects the. Toyota Mini VCI on 64 bit Windows.
  2. DOWNLOAD JUST FINE. Mini vci j2534 for windows 10 NO VIRUSES ETHER. 21-Jul-19 15:39 As always, Outstanding! 25-May-18 18:01 I use this application and get Mini vci j2534 for windows 10 drv in the blink of an eye.

I bought a cheap Chinese Mini VCI J2534 cable for diagnostics and auto settings. I used it and found that you can do a lot with it through the Toyota Techstream service program.

And here he came to me:

Package includes the drivers for the cable and the program itself-Toyota Techstream with V10.10.018 version.

Cable for diagnosis Mini-VCI J2534

I post links for download: Toyota Techstream 10.10.018 , drivers MVCI_Driver_for.msi
Then I will tell you how to install the driver and the program under Windows 7 or 8.1 x64.
The instruction can be found on the Internet , but I will write it here.

Mvci driver for toyota.msi windows 10

INSTALLATION INSTRUCTIONS Techstream on Windows 7, 8.1 – x64 bit

If you bought the MINI VCI J2534 cable and there is no unpacked driver on the disk, and there is only the MVCI Driver for TOYOTA.msi installer that does not really work when installed on any Windows x64 and gives an error, and it must be installed, otherwise the sw will not work, and it does not matter. This problem can be solved by installing the MVCI Driver for TOYOTA.msi manually as follows:
1. Create a folder on drive C: Temp
2. Copy to our C: Temp folder our MVCI Driver for TOYOTA.msi file
3. With Administrator rights open and run the following command:
msiexec / a “C: temp MVCI Driver for TOYOTA.msi” / qb TARGETDIR = c: temp mvci
this command will extract all content from the MSI file to the C: Temp mvci folder
4. We delete the file MVCI Driver for TOYOTA.msi from the folder C: Temp mvci, it is no longer needed, we can also remove it from the folder C: Temp
5. We go in C: Program Files (x86) and create there folder XHorse Electronics and in it one more MVCI Driver for TOYOTA TIS and move there all the contents from the folder C: Temp mvci
6. Connect the MINI VCI cable to the USB port.
IMPORTANT: When the automatic driver installation process starts, it must be canceled and the device will not be detected.
7. Open the Device Manager and locate the two faulty devices in the list. They will have a yellow icon indicating that Windows could not install the drivers for them. Now right click on the faulty device, select “Update Driver”, then “search on this computer” next “Browse my computer” … and specify the path to “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS “(” include subfolders “check box). Click the “Next” button and wait for the drivers to be installed.
Now you should see two new devices: “Controllers USB USB Serial Converter” and “Ports (COM & LPT) USB Serial Port (COM —)”. Where instead of a line will be your figure COM port.
8. Next, go to the path “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS” and run the file “FirmwareUpdateTool.exe”.
In the opened program, click the “Device Info” button. You should see the “connected device” graph filled.

If you see this, then your MINI VCI works under a 64-bit version of Windows and can be used by other programs, such as Techstream.

There is a connection with the cable!

9. Now install Techstream using the software “Techstream.exe” of any version. after installation do not run it yet.
10. To activate it, you need to change the TISFunction = 1 line in the C: Program Files Toyota Diagnostics Techstream Env IT3System.ini file and change it to “0” and save the file.

Now you need to make the program see the cable
So that Techstream sees MINI-VCI under Windows x64, the Registry should be changed like this:

Mini Vci Driver For Toyota Windows 10 32-bit

1. Open the Windows Registry Editor, on Windows 8.1 x64, the path is:
[HKEY_LOCAL_MACHINE SOFTWARE PassThruSu pport.04.04 DENSO CORPORATION – TIS Techstream VIM]
But there must definitely be a folder PassThruSupport.04.04 and it has a subfolder (I have DENSO CORPORATION – TIS Techstream VIM) it should have the following parameters
: “Name” = “XHorse – MVCI”
“Vendor” = “XHorse ELECTRONICS Co., Ltd.”
“ConfigApplication” = “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS FirmwareUpdateTool.exe”
“FunctionLibrary” = “C: Program Files (x86) XHorse Electronics MVCI Driver for TOYOTA TIS MVCI32.dll ”
” APIVersion “=” 04.04 ”
” ProductVersion “=” 1.1.0 ”

“J1850VPW” = dword: 00000001
“J1850PWM” = dword: 00000001
“ISO9141” = dword: 00000001
“ISO14230” = dword: 00000001
“CAN” = dword: 00000001
“ISO15765” = dword: 00000001
“SCI_A_ENGINE” = dword: 00000000
” SCI_A_TRANS “= dword: 00000000
” SCI_B_ENGINE “= dword: 00000000
” SCI_B_TRANS “= dword: 00000000

Also there is a section
[HKEY_LOCAL_MACHINE SOFTWARE PassThruSupport.04.04 DENSO CORPORATION – TIS Techstream VIM Parameter]
“Baudrate” = dword: 0001c200
“Comport” = dword: 00000005
“Connect” = dword: 00000000
“Interface” = “AUTOMATIC”
” Firmware “=” x ”
” LE “= dword: 00000000
” LN “= dword: 00000001
” SN “= dword: 00000000

Mini

But you can manually do nothing, but simply make changes to the registry by downloading and running this file .

Mvci Driver For Toyota Windows 10 64 Bit Download

2. Launch Techstream. Go to Setup | VIM select will open the menu in it should be “XHorse-MVCI”
3. Connect the MVCI cable to the USB interface, start the program, then click “Connect to Vehicle” in Toyota Techstream. If everything works, you will be asked to confirm the car / year / model, and if you connect to the car and start it, you will get access to the diagnostic interface.

The first thing to do was to turn off the orange American DRLs. other features stay tuned!

Related posts:

Original Xhorse MINI VCI is a one-electronic-stop cable with Techstream TIS V10.30.029 (newest) and 16pin & 22pin connectors for Toyota & Lexus cars since 1996, for OEM diagnostics.

Supported Protocols:

K-Line ISO 9141/
KWP 2000 ISO 14230-4/
SAE J1850 PWM/
SAE J1850 VPW/
CAN 2.0B ISO 11898 /
CAN ISO 15765-4

Mvci Driver For Toyota

MINI VCI Single cabe Feature:

Support Toyota TIS OEM diagnostic software
Cost-effective, the price of product is only one-third of similar foreign products.
High performance with ARM cpu inside.
High reliability of products using SMD chip, and certified by CE and FCC.
Support all the diagnostic communication protocols needed for Toyota (since 1996).
Upgrade the firmware via the Internet to improve product.

Techstream cable available for below:
MINI VCI cable + 16pin connector ($26.99) – TOYOTA + LEXUS
+ 22 pin connector ($44.99) for old cars
3 in 1 MVCI cable ($89) – TOYOTA TIS + HONDA HDS + VOLVO DICE

And you can download the newest Toyota TIS Techstream Here:

MINI VCI Installation and Update:

Articles about MINI VCI:

Toyota Techstream TIS 11.00.017, what’s new & where to get?
Mini VCI get “unable to Connect to VIM” error message

Some customers Review on selecting Techstream Customize Functions: Gen III

“I purchased Techstream and a min vci cable from a Chinese seller for $19 to do some customize settings on a 2010 Prius.

I used:

Laptop with Windows XP 32 bit

Xhorse mini vci cable with Teachstream 8.10.021 from uobdii.com

Note:

1- new software- toyota-techstream-10.30.029.zip or toyota-techstream-10.10.018.zip – should be ok

2- many Techstream cables in China, but some bad with white PCB

TIS cable of Quality A comes with green PCB

Model:

2010 Prius
First attention please!!

The USB to OBD2 VCI cable driver will only run on a 32 bit computer. Even with an old 32 bit Win XP computer, I had to load/reload the cable driver 3 times. Once done, it is great.

Mini Vci Driver For Toyota Windows 10 64-bit

Mini Vci Driver For Toyota Windows 10

Your owner’s manual covers the customizable features built into the car.

To get to the customizable features, connect the laptop to the car OBD2 port just under the steering column. Start MINI VCI Techstream and depress the brake pedal and press the cars power button. Techstream should connect and ask you the options on the car (radar cruise control and sunroof). It will also pop up with the VIN number and ask if you want to save it.

After that it’s easy. Just select the third tab from the left, Customize

Next select one of the Customize Functions and a small box will pop up with parameters

If you click on the parameter, an explanation will show in the Item Description box below. After you are done selecting parameters, click on the arrow in the bottom left of the small box and it will ask you if you want to save. Select “Yes” and move onto the next Function. You will be amazed at the options you have. You can even turn off the seat belt beeper on the driver or the passenger side or both.

I turned on 4-door unlocking and turned the backup beeper to only 1 beep. You can turn on/off the remote button functions. Actually, my dealer inadvertently turned off ALL of my remote functions and was not able to turn them back on. This was my main reason for digging into MINI VCI Techstream TIS interface. I was also able to program a new remote Key Fob using the Smart Key Menu on the fourth tab.

Hope you all have fun with this!”

Mini Vci Driver For Toyota Windows 10 Windows 10

MINI VCI FOR TOYOTA TIS Techstream Comparison Table:

ProductItem (No.)SoftwareProtocolFunction PriceNote
MINI VCI

（SV46）

Out of Stock

Software:
V10.30.029Firmware:
v2.0.4		K-Line ISO 9141/KWP 2000 ISO 14230-4/SAE J1850 PWM/SAE J1850 VPW/CAN 2.0B ISO 11898 /CAN ISO15765-41.read and clear faults
2. read live data
3. some other tests etc.		$26.991.only one-third price of foreign products;
2.Support all the diagnostic communication protocols;
3. no license required
Cheap MINI VCI

（SV46-B）

$22.99
MINI VCI with 22Pin Connector

(SP61)

$44.99
Original Xhorse MVCI 3 IN 1 Toyota TIS

(SP70)

Toyota: V10.30.029
Honda: V2.018
Volvo: 2010A		Support all the diagnostic communication protocols1.read and clear faults
2. read live data
3. some other tests etc.		$89.001) Multi-language;
2) Supported car models: Honda, Toyota, Lexus and Volvo;
3)OBDII/DLC3 diagnostics

Mini Vci Driver For Toyota Windows 10 Free

Save